38 lines
1.8 KiB
Markdown
38 lines
1.8 KiB
Markdown
# SoundThermo
|
|
|
|
Simple thermometer using sound card input and output, a thermistor and couple of resistors.
|
|
|
|
# Hardware
|
|
|
|
One should assemble components as shown on scheme below:
|
|
|
|
|
|
|
|
# Using the software
|
|
|
|
First, one should compile the project (target is .NET Core 3.1). After that (assuming your executable
|
|
is named `SoundThermo.exe` one should enumerate all sound devices in the system with:
|
|
`SoundThermo.exe list`
|
|
|
|
You will get list of all sound devices with their GUIDs. Identify your device and note its GUID.
|
|
|
|
After that one should run `SoundThermo.exe measure --input <INPUT_GUID> --output <OUTPUT_GUID> --duration <DURATION>`.
|
|
Duration means amount of time spent for measuring (longer the measurement, more precise results). As for me, one second
|
|
is enough.
|
|
|
|
# How it works
|
|
|
|
The idea is to generate harmonic signal with some amplitude `Vin` on sound output and then measure
|
|
`Vout` - amplitude of same signal on microphone input.
|
|
|
|
If we consider just left or just right channel, we could not that `Vout = R2 * Vin / (R1 + R2)`,
|
|
where `R1` and `R2` are resistor values. Unfortunately, due to different volumes in input and output,
|
|
really equation is like `Vout = R2 * Vin * k / (R1 + R2)`. So firstly we do measurement via right
|
|
channel (where we know both `R1` and `R2`), to determine `k`. After that we repeat same measurement
|
|
using left channel. Knowing `Vin`, `Vout`, `R2`, and `k` we can determine value of thermistor.
|
|
After that we compute real temperature via approximation formula. |