From 437ea74c1741028a6fadf11f02f0ceece6a567d9 Mon Sep 17 00:00:00 2001
From: Denis Denisov <ftc.denis@gmail.com>
Date: Fri, 11 Oct 2024 20:52:06 +0300
Subject: [PATCH] =?UTF-8?q?=D0=9F=D0=B5=D1=80=D0=B5=D0=B3=D1=80=D0=B5?=
 =?UTF-8?q?=D0=B2=20=D1=80=D0=B5=D0=BB=D0=B5=20=D0=B2=D1=80=D0=B5=D0=BC?=
 =?UTF-8?q?=D0=B5=D0=BD=D0=BD=D0=BE=20=D0=BE=D1=82=D0=BA=D0=BB=D1=8E=D1=87?=
 =?UTF-8?q?=D0=B0=D0=B5=D1=82=20=D0=BD=D0=B0=D0=B3=D1=80=D0=B5=D0=B2,=20?=
 =?UTF-8?q?=D0=B0=20=D0=BD=D0=B5=20=D1=81=D0=B1=D1=80=D0=B0=D1=81=D1=8B?=
 =?UTF-8?q?=D0=B2=D0=B0=D0=B5=D1=82=20=D1=81=D0=BE=D1=81=D1=82=D0=BE=D1=8F?=
 =?UTF-8?q?=D0=BD=D0=B8=D0=B5=20=D1=83=D0=BF=D1=80=D0=B0=D0=B2=D0=BB=D0=B5?=
 =?UTF-8?q?=D0=BD=D0=B8=D1=8F?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 heater_v3.ino | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/heater_v3.ino b/heater_v3.ino
index 95d2ac3..c8ca835 100644
--- a/heater_v3.ino
+++ b/heater_v3.ino
@@ -32,6 +32,8 @@ DHT dht(DHTPIN, DHTTYPE);
 
 // deviation from target t allowed (in degrees multiplied by 100)
 #define T_HYSTERESIS 150
+// relay cooldown temperature (after what t we allow to turn on relay again) (in degrees multiplied by 100)
+#define RELAY_COOLDOWN_T 500
 // timeout to switch from external to internal temperature data (in milliseconds)
 #define SWITCH_TO_INTERNAL_TIMEOUT 50000
 
@@ -287,7 +289,6 @@ void loop()
 		{
 			cur_state = 1;
 		}
-
 		else if (current_t > target_t + T_HYSTERESIS)
 		{
 			cur_state = 0;
@@ -297,14 +298,22 @@ void loop()
 	{
 		cur_state = override_state;
 	}
-	if (relay_t > CRITICAL_T)
-	{
-		//Serial.printf("Critical overheat, t = %d\n", relay_t);
-		cur_state = 0;
-		overheat = 1;
-	}
-	else overheat = 0;
-	digitalWrite(RELAY_PIN, cur_state);
+  if (!overheat)
+  {
+    if (relay_t > CRITICAL_T)
+    {
+      overheat = 1;
+    }
+  }
+	else 
+  {
+    if (relay_t < CRITICAL_T - RELAY_COOLDOWN_T)
+    {
+      overheat = 0;
+    }
+  }
+  if (cur_state && !overheat) digitalWrite(RELAY_PIN, 1);
+  else digitalWrite(RELAY_PIN, 0);
 	if (u) 
 	{
 		Serial.printf("State %d Relay t %d Internal t %d External t %d Current t %d Target t %d\n", cur_state, relay_t, internal_t, external_t, current_t, target_t);