Обновил документацию. Добавил второй датчик температуры. Добавил unit-файл для systemd

README.md

@@ -6,6 +6,12 @@
 
 0 - Температура включения реле (если ниже, включится) (в 0.01 градуса)
 1 - Температура выключения реле (если выше, выключится) (в 0.01 градуса)
-2 - Режим работы (0 - авто, 1 - принудительно включено, 2 - принудительно выключено)
+2 - Режим работы (0 - авто, 1 - вручную)
 3 - Текущая температура (в 0.01 градуса)
 4 - Текущее состояние реле (0 - выключено, 1 - включено)
+5 - Дополнительная температура (второй датчик)
+
+Используется вот такой термистор
+https://files.amperka.ru/datasheets/B57164.pdf
+Из них тот у которого 10кОм при 25градусах
+

defrost.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=Defrost service
+After=network.target
+
+[Service]
+ExecStart=/home/root/bin/defrost /home/root/bin/defrost.cfg
+User=root
+Group=root
+RuntimeDirectory=/home/root/bin
+RuntimeDirectoryMode=0755
+
+[Install]
+WantedBy=multi-user.target

src/ModbusServiceWorker.cpp

@@ -1,5 +1,6 @@
 #include "ModbusServiceWorker.h"
 #include "libdiff.h"
+#include "globals.h"
 
 #include <iostream>
 
@@ -15,7 +16,55 @@ void ModbusServiceWorker::Run()
     try {
         while (true)
         {
-			
+			string header = s.Receive(7);
+			string transaction_id = header.substr(0, 2);
+			string protocol_id = header.substr(2, 2);
+			int length = ((int)(unsigned char)header[5]) | (((int)(unsigned char)header[4]) << 8);
+			string unit_identifier = header.substr(6, 1);
+			log->LogString("Receiving modbus frame of length " + ToString(length));
+			string data = s.Receive(length - 1);
+			log->LogString("Received modbus frame of length " + ToString(length));
+			string answer_data = "";
+			int function = data[0];
+			log->LogString("Processing function " + ToString(function));
+			if (function == 3)
+			{
+				LockMutex(register_mutex);
+				int address = GetInt(data.substr(1, 2));
+				int amount = GetInt(data.substr(3, 2));
+				string result = "";
+				for (int a = address; a < address + amount; a++)
+				{
+					int val = 0;
+					if (a >= 0 && a <= 65535) val = registers[a];
+					result += (char)((val >> 8) & 0xFF);
+					result += (char)(val & 0xFF);
+				}
+				ReleaseMutex(register_mutex);
+				answer_data += (char)3;
+				answer_data += (char)result.length();
+				answer_data += result;
+			}
+			else if (function == 6)
+			{
+				LockMutex(register_mutex);
+				int address = GetInt(data.substr(1, 2));
+				int value = GetInt(data.substr(3, 2));
+				if (address >= 0 && address <= 65535)
+				{
+					registers[address] = value;
+				}
+				ReleaseMutex(register_mutex);
+				answer_data = data;
+			}
+			else throw (string)("Unknown function " + ToString(function));
+			answer_data = unit_identifier + answer_data;
+			string length_str = "";
+			length_str += (char)((answer_data.length() >> 8) & 0xFF);
+			length_str += (char)((answer_data.length()) & 0xFF);
+			log->LogString("Sending answer");
+			s.Send(transaction_id + protocol_id + length_str + answer_data);
+			log->LogString("Answer sent");
         }
     }
     catch (string s)
@@ -34,6 +83,17 @@ void ModbusServiceWorker::Run()
     s.Disconnect();
 }
 
+int ModbusServiceWorker::GetInt(const string &s)
+{
+	int res = 0;
+	for (int i = 0; i < (int)s.length(); i++)
+	{
+		res <<= 8;
+		res += (int)(unsigned char)s[i];
+	}
+	return res;
+}
+
 ModbusServiceWorker::~ModbusServiceWorker()
 {
     s.Disconnect();

src/ModbusServiceWorker.h

@@ -12,6 +12,8 @@ class ModbusServiceWorker : public Thread
     int socket;
     SynchronousSocket s;
     LogFile *log;
+
+    int GetInt(const std::string &s);
 protected:
     virtual void Run();
 public:

src/defrost.cpp

@@ -3,6 +3,7 @@
 #include "jhd1313m1.h"
 #include "mraa/common.hpp"
 #include "mraa/gpio.hpp"
+#include "mraa/aio.hpp"
 #include "globals.h"
 #include "ModbusServiceListenThread.h"
 #include "libdiff.h"
@@ -13,23 +14,32 @@
 #include <unistd.h>
 #include <sys/file.h>
 #include <errno.h>
+#include <cmath>
 
 #define GPIO_PIN_1 2
+const int AIO_PIN = 1;
 
-void temperature_update(upm::GroveTemp* temperature_sensor, upm::Jhd1313m1 *lcd)
+void temperature_update(upm::GroveTemp* temperature_sensor, upm::Jhd1313m1 *lcd, mraa::Aio* additional_t_sensor)
 {
 	// other helper variables
-	int temperature; // temperature sensor value in degrees Celsius
+	float temperature; // temperature sensor value in degrees Celsius
 	float fade; // fade value [0.0 .. 1.0]
 	uint8_t r, g, b; // resulting LCD backlight color components [0 .. 255]
 	std::stringstream row_1, row_2; // LCD rows
 
 	// update the min and max temperature values
-	temperature = temperature_sensor->value() * 100;
+	float voltage = additional_t_sensor->read();
+	voltage = voltage * 5 / 1023.0;
+	temperature = 1.0 / (log(voltage / 2.5) / 4300.0 + 1.0 / 298.0) - 273.0;
+	temperature *= 100;
+	temperature = (int)temperature;
+
 	registers[REGISTER_CUR_TEMP] = temperature;
+	float additional_temperature = temperature_sensor->value() * 100;
+	registers[REGISTER_SECONDARY_TEMP] = additional_temperature;
 
 	// display the temperature values on the LCD
-	row_1 << "T " << temperature / 100 << " Mode: ";
+	row_1 << "T " << temperature / 100 << " M: ";
 	int mode = registers[REGISTER_MODE];
 	if (mode == 0) row_1 << "auto";
 	else if (mode == 1) row_1 << "on";
@@ -59,11 +69,11 @@ void temperature_update(upm::GroveTemp* temperature_sensor, upm::Jhd1313m1 *lcd)
 	lcd->setColor(r, g, b);
 }
 
-int main()
+int main(int argc, char *argv[])
 {
 	try {
 		// ����� lock-file, ����� ���������� ������ ���� ��������� �������
-		int lockfile = open("defrost.lock", O_RDWR | O_CREAT, 0777);
+		int lockfile = open("/tmp/defrost.lock", O_RDWR | O_CREAT, 0777);
 		if (lockfile == -1)
 		{
 			cout << "Unable to open file for locking, errno = " << errno << "\n";
@@ -90,6 +100,7 @@ int main()
 		{
 			return EXIT_FAILURE;
 		}
+		mraa::Aio additional_t(AIO_PIN);
 
 		// temperature sensor connected to A0 (analog in)
 		upm::GroveTemp* temp_sensor = new upm::GroveTemp(0);
@@ -105,8 +116,8 @@ int main()
 		}
 		// load config
 		ConfigParser cfg;
-		cfg.Load("defrost.cfg");
-		mainlog.InitLogging(cfg.GetParam("LogPath"), LIBLOGSINGLEFILE);
+		cfg.Load(argv[1]);
+		mainlog.InitLogging(cfg.GetParam("LogPath"), LIBLOGSINGLEFILE, "defrost", true);
 		mainlog.LogString("Defrost service started");
 
 		if (pthread_mutex_init(&register_mutex, NULL) != 0)
@@ -127,9 +138,18 @@ int main()
 		while (true)
 		{
 			LockMutex(register_mutex);
-			temperature_update(temp_sensor, lcd);
+			temperature_update(temp_sensor, lcd, &additional_t);
+			int mode = registers[REGISTER_MODE];
+			if (mode == 0)
+			{
 				if (registers[REGISTER_CUR_TEMP] < registers[REGISTER_ON_TEMP]) io_value = 1;
 				else if (registers[REGISTER_CUR_TEMP] > registers[REGISTER_OFF_TEMP]) io_value = 0;
+			}
+			else if (mode == 1)
+			{
+				io_value = registers[REGISTER_CUR_STATE];
+			}
+			registers[REGISTER_CUR_STATE] = io_value;
 			gpio.write(io_value);
 			ReleaseMutex(register_mutex);
 			sleep(1);

src/globals.h

@@ -8,6 +8,7 @@ const int REGISTER_OFF_TEMP = 1;
 const int REGISTER_MODE = 2;
 const int REGISTER_CUR_TEMP = 3;
 const int REGISTER_CUR_STATE = 4;
+const int REGISTER_SECONDARY_TEMP = 5;
 
 extern int registers[65536];
 extern pthread_mutex_t register_mutex;